TAEHA AirBank Compressed Air Tank Pulse Valve
The TAEHA AirBank pulse valve compressed air tank system is manufactured in South Korea, holds patents in the US and EU, and meets top international quality standards with CE and UL certifications. Tan Thanh Industrial Filter Company is the official distributor in the Vietnam market.
The valves integrated into TAEHA’s compressed air tanks are diaphragm pulse valves, including 1-stage and 2-stage models, available in remote-controlled and direct-solenoid controlled versions. These valves are designed in a manifold style to mount multiple valves directly onto a single compressed air tank (standard lengths up to 6 meters), serving as distribution valves for compressed air pulses through output pipes.
TAEHA diaphragm pulse valves and compressed air tanks meet quality and safety standards, ensuring operation in harsh environments with dust and water resistance, a wide temperature range, and electrical and pressure safety in potentially explosive dust and gas environments.
The design allows the valve to be installed directly into the compressed air tank (manifold), featuring a pressure gauge and drain valve at the bottom, which is highly suitable for dust recovery systems. TAEHA’s high-quality, synchronized, and aesthetically pleasing design allows for flexible installation in various locations, including indoors, outdoors, or directly atop dust filter systems where environmental conditions are more demanding than inside the factory.
The TAEHA pulse valve compressed air tank system functions to provide powerful compressed air pulses to clean dust accumulated on bag and cartridge filters.
Operation and maintenance are flexible, convenient, and easy to install and inspect.
TAEHA always has spare parts kits available for periodic replacement. Customers should contact Tan Thanh directly for guidance on maintenance and genuine spare parts to ensure the prevention of counterfeit or low-quality products.
Advantages of TAEHA Airbank
- High dust cleaning efficiency: High-quality TAEHA Pulse Valves integrated into the TAEHA AirBank compressed air tank maximize airflow and minimize pressure loss, enhancing dust cleaning efficiency. Options can be customized based on valve type, aluminum outlet pipe size, number of valves, and valve pitch (spacing), according to customer requirements.
- Convenient, easy to install and replace: Pulse valves and air tanks are perfectly combined and pre-assembled, eliminating traditional angle-valve and threaded branch-pipe connections, saving time and production costs. Using an Air Header Set made of aluminum with an integrated bracket, pressure gauge, drain valve, and main air supply valve pre-assembled makes the unit compact and easy to maintain.
- Connectivity: The header cap design allows two compressed air tanks to be linked together using coaxial pipes with precise threads and couplings.
- CNC and Surface Anodizing: The cylindrical aluminum air tanks and accessories are CNC-machined. The aluminum air distribution pipes are anodized to prevent abrasion, rust, and operational errors, while creating a sophisticated and beautiful product finish.
- Compliance with safety standards: The header set with round caps meets US and EU safety guidelines for pressure vessel equipment.
TAEHA AirBank Device Specifications
Technical specifications table for TAEHA AirBank compressed air tank pulse valves:
| Parameter / Model | TAH-20 | TAH-25 | TAH-30 | TAH-50 | |
| Compressed air tank size (mm) | Φ100 | Φ160 | Φ165 | Φ200 | |
| Valve model | 5820-M 4820-M | 5825-M 4825-M | 5430-M 4430-M | 5440-M 4440-M | 5450-M 4450-M |
| Compressed air outlet size (INCH) | ¾” | 1″ | 1¼” | 1 ½” | 2″ |
| Distance between valves (min and standard) (mm) | 90 -> 175, 190 | 110 -> 190, 210 | 155 -> 210, 230 | ||
| Compressed air supply inlet (INCH) | G ½” | G 1¼” | G 1½” | ||
| Gauge, drain hole size | Rc 1/4″ | Rc 3/8″, 1/4″ | |||
| Max pressure | 7.5 kgf/㎠ | ||||
| Valve operation | Normally closed | ||||
| Compressed air tank length (max) | Standard 6 meters (Optional 8 meters) | ||||
| Surface treatment | Aluminum anodizing (membrane thickness 10㎛, hardness 4H) | ||||
TAEHA Air Bank Information and Ordering Code:
Information of a typical TAEHA AirBank device assembly:
TAEHA Airbank device: Model TAH-20B-4825M-PxN.
Tank-mounted valve type: Pulse Valve 3/4″. Single, Integral, Manifold.
Ordering Code:
- 20: Tank size: Size 20 is a cylindrical compressed air tank with a diameter of ∅100mm.
- B: Flange position: Flange position for mounting the valve horizontally on the compressed air tank body.
- 4: Integral solenoid: A type of valve with an integrated control coil mounted directly on the top of the valve cover.
- 8: Single pilot: Valve with a 1-stage structure (1 diaphragm, normally closed).
- 25: Pipe size: 1″ compressed air pulse output aluminum pipe size.
- M: Manifold: A type of mounting with multiple valves integrated on one compressed air tank.
- PxN: Pitch: The length of the compressed air tank is calculated using the formula: P (distance between the centers of 2 output pipes of 2 adjacent valves) multiplied by the number of valves (N-1) (excluding the first valve) plus the external clearance from both ends of the compressed air tank to the centers of the 2 outermost valves. These distances can be customized upon customer request.
- Type of Thread: Thread type for air supply pipe, main air supply valve, drain valve, and differential pressure gauge mounting pipe (N: NPT, G: G-Parallel, B: BSP Taper).
- Coil Voltage: Voltage code for valves with solenoid coils (typically AC 220~240V, 50~60Hz).
Contact Distributor
Tan Thanh is the official distributor of TAEHA dust recovery system equipment in the Vietnam market.
View Tan Thanh’s official authorized distributor certificate from TAEHA
Hotline: 0901 858 686
Direct consultation:
Nguyen Phuoc Thuan
Phone: 0917 531 007; Email: kelvin@tatafilter.com
Address: No. 50, Street No. 1, Cu Xa Dien Luc, Truong Tho Ward, Thu Duc City, HCMC, Vietnam.
ALWAYS OFFERING GOOD PRICES FOR INDUSTRIAL FACTORIES.
