FineTek Valve BRC-20NC6
FineTek Valve BRC-20NC6 is a diaphragm solenoid valve, normally closed, angle type with 2 air inlet/outlet pipe connections. The valve body has 2 air chambers separated in the middle by a valve diaphragm and connected by an air passage. Integrated electromagnetic coil has the function of directly controlling the valve to open and close. The valve is used specifically in dust collection systems.
Working principle:
- The valve consists of 2 air chambers divided by a piece of diaphragm. The 2 chambers are connected through an air passage (air passage’s diameter is smaller than the orifice of the pilot valve).
- When the orifice opens, the air in the upper chamber is exhausted much faster than the speed of air that enters through the air passage. The air pressure of the upper chamber drops significantly, the higher pressure of the lower chamber pushes the diaphragm up and opens a bigger passage for air to enter into the bottom chamber. This sudden burst of air is used to inflate the fabric filter so as to shake off all the dust clinging on the bag filter.
- When the orifice closes, the pressure in both chambers equalizes and the diaphragm returns to its original position via the force of the coiled spring.
For solenoid coil integrated valves, such as the model FineTek Valve BRC-20NC6, the valve opening and closing operation to create a pneumatic pulse is controlled directly from the solenoid coil mounted right on the valve body.
Order Information of the FineTek Valve BRC-20NC6:
Model BRC-20NC6:
20: Connection size of single diaphragm 20: 3/4″ PT.
6: Power supply for integrated pilot: DIN connector: 220VAC.
Model BRC-20NC6 has the Order Code BRC10000-BBA7A07MHB
10: Control method and wiring: B is Integrated type; Solenoid valve with DIN connector.
11,12: Process connection: A7: 3/4″ PT.
13: Diaphragm type: A is Single diaphragm.
18: Power supply for solenoid valve: B = 220VAC.
Technical information of FineTek Valve BRC-20NC6:
Diaphragm valve with quick fiitings integrated type. Orifice size 3/4 inch. Single diaphragm. Flow factor 12.04 m3/h (14 gal/min). Operating pressure 0.3 ~ 8.6Bar. Weight 780g.
Applications:
Pulse cleaning and filtering system in dust collectors, also suitable for filter bags, filter barrels, flat bags, ceramic tubes and filter bags for metal fiber.
USE of FineTek Valve BRC-20NC6:
- Improve dust collector efficiency and effectiveness.
- Deliver high volumes of air for dust collector bag cleaning.
- Sequence and control dust collector cleaning process.
INDUSTRY:
- Aggregate processing
- Cement production
- Concrete
- Most all powder and bulk solids handling, storage and processing industries.
Features:
- Fast response, large flow volume, effective cleaning action on fabric filter.
- Low air consumption.
- Compatible with programmable sequential controller.
- Ease of adjustment in jet pulse timing and duration.
- Flexible disassembly and air pipe connection for quick operation compared to standard threaded valves.
- Eliminates threading of pipes.
Contact to order FineTek’s valves:
TAN THANH FILTRATION COMPANY LIMITED (TATA FILTER)
Thank you for your interest and visit to Tan Thanh’s website. Please contact Tan Thanh Company to buy Taiwan Dust Removal Valves, with genuine FINETEK warranty, to prevent counterfeit goods, goods of unknown origin, and poor quality goods.
Tan Thanh is the Authorized Distributor for FineTek: Authorized Letter.
See more about FineTek: Liquid & Solid Industry Measurements | FineTek – 桓達科技股份有限公司 (fine-tek.com)
Technical support and consulting: Sales engineering team: Contact us | Tan Thanh
HOTLINE: 0901 858 686
Direct consultation:
- Kelvin Nguyen. Hotline: 0917531007 – Email: kelvin@tatafilter.com
- Pham Thanh Binh. Phone: 0919823239 – Email: thanhbinh@tatafilter.com
Note: Please contact us directly for appropriate consulting information. Any form of copying content or images must have the written consent of Tan Thanh Industrial Filter Company.
References:
DOCUMENT: BRC Valve and Controller for Dust Collector System.
PRODUCTS OF FINETEK:
DUST COLLECTOR SYSTEM:
- Negative Pressure Dust Collection System | Tan Thanh
- Cartridge Dust Collection System | Tan Thanh
- Filter Hodd Cabinet – Tủ hút | Tân Thanh (in Vietnamese)
TECHNICAL SUPPORT:
- What is the reason for the dust valve not working? (in Vietnamese)
- Learn about genuine dust valve maintenance (in Vietnamese)
NEWS:
