FINETEK VALVE BRC-25NC6

Valve for dust collector system FineTek Valve BRC-25NC6 is a diaphragm solenoid valve, normally closed, angle type with 2 air inlet/outlet pipe connections by coupling. The valve body has 2 air chambers separated in the middle by a valve diaphragm and connected by an air passage. Integrated electromagnetic coil has the function of directly controlling the valve to open and close. The valve is used specifically in dust collection systems.

Working principle:

• The valve consists of 2 air chambers divided by a piece of diaphragm. The 2 chambers are connected through an air passage (air passage’s diameter is smaller than the orifice of the pilot valve).
• When the orifice opens, the air in the upper chamber is exhausted much faster than the speed of air that enters through the air passage. The air pressure of the upper chamber drops significantly, the higher pressure of the lower chamber pushes the diaphragm up and opens a bigger passage for air to enter into the bottom chamber. This sudden burst of air is used to inflate the fabric filter so as to shake off all the dust clinging on the bag filter.
• When the orifice closes, the pressure in both chambers equalizes and the diaphragm returns to its original position via the force of the coiled spring.

For solenoid coil integrated valves, such as the model FineTek Valve BRC-25NC6, the valve opening and closing operation to create a pneumatic pulse is controlled directly from the solenoid coil mounted right on the valve body.

Order Information of the FineTek Valve BRC-25NC6:

Model BRD-25NC6:

• 25: Connection size of single diaphragm 25: 1″ PT.
• 6: Power supply for integrated pilot: DIN connector: 220VAC.

Model BRC-25NC6 has the Order Code BRC10000-BBA8A07MHB:

• 10: Control method and wiring: B is Integrated type; Solenoid valve with DIN connector.
• 11,12: Process connection: A8: 1” PT.
• 13: Diaphragm type: A is Single diaphragm.
• 18: Power supply for solenoid valve: B = 220VAC.

Technical information of FineTek Valve BRC-25NC6:

Model BRC-25NC☐: Diaphragm valve with quick fiitings integrated type. Orifice size 1 inch. Single diaphragm. Flow factor 19.78m3/h (23gal/min). Operating pressure 0.3 ~ 8.6Bar. Weight 1070g.

Applications:

Pulse cleaning and filtering system in dust collectors, also suitable for filter bags, filter barrels, flat bags, ceramic tubes and filter bags for metal fiber.

USE of FineTek Valve BRC-20NC6:

• Improve dust collector efficiency and effectiveness.
• Deliver high volumes of air for dust collector bag cleaning.
• Sequence and control dust collector cleaning process.

INDUSTRY:

• Aggregate processing
• Cement production
• Concrete
• Most all powder and bulk solids handling, storage and processing industries.

Features:

• Fast response, large flow volume, effective cleaning action on fabric filter.
• Low air consumption.
• Compatible with programmable sequential controller.
• Ease of adjustment in jet pulse timing and duration.
• Flexible disassembly and air pipe connection for quick operation compared to standard threaded valves.
• Eliminates threading of pipes.

Contact to order FineTek’s valves:

TAN THANH FILTRATION COMPANY LIMITED (TATA FILTER)

Thank you for your interest and visit to Tan Thanh’s website. Please contact Tan Thanh Company to buy Taiwan Dust Removal Valves, with genuine FINETEK warranty, to prevent counterfeit goods, goods of unknown origin, and poor quality goods.

Tan Thanh is the Authorized Distributor for FineTek: Authorized Letter. 

See more about FineTek: Liquid & Solid Industry Measurements | FineTek – 桓達科技股份有限公司 (fine-tek.com) 

Technical support and consulting: Sales engineering team: Contact us | Tan Thanh

HOTLINE: 0901 858 686

Direct consultation:

• Kelvin Nguyen. Hotline: 0917531007 – Email: kelvin@tatafilter.com 
• Pham Thanh Binh. Phone: 0919823239 – Email: thanhbinh@tatafilter.com

Office: 50, Street No.1, Cu xa Dien Luc, Thu Duc Ward, Ho Chi Minh City, Viet Nam

Note: Please contact us directly for appropriate consulting information. Any form of copying content or images must have the written consent of Tan Thanh Industrial Filter Company.

References:

DOCUMENT: BRC Valve and Controller for Dust Collector System.

PRODUCTS OF FINETEK:

• FINETEK valve | Tan Thanh
• FineTek AE711A-AE710A Controller | TAN THANH – Genuine control board

DUST COLLECTOR SYSTEM:

• Negative Pressure Dust Collection System | Tan Thanh
• Cartridge Dust Collection System | Tan Thanh
• Filter Hodd Cabinet – Tủ hút | Tân Thanh (in Vietnamese)

TECHNICAL SUPPORT:

• What is the reason for the dust valve not working? (in Vietnamese)
• Learn about genuine dust valve maintenance (in Vietnamese)

NEWS:

• Cooperates with Particle Technology and SGS | Tan Thanh
• Attend ENTECH 2023 international exhibition in Hanoi (in Vietnamese)
• Treatment of dust pollution from NPK fertilizer production (in Vietnamese)
• Cement dust pollution and dust filter solutions | Tan Thanh